STR LED STAIRS CONTROLLER

82.00

  • UP TO 24 STEPS
  • TOUCH BUTTONS MENU FOR EASY SETUP
  • ALLOWS TO LIGHT UP STAIRS IN SEQUENCE
  • FADE OUT EFFECT
  • ADJUSTABLE TIMING
  • ADJUSTABLE BRIGHTNESS
  • BACKLIGHT OF FIRST AND LAST STEP IN NIGHT MODE
  • CAN BE INCLUDED TO MYSENSORS NETWORK * (check CONNECTIVITY tab)
  • PIR SENSORS AND POWER SUPPLY ARE NOT INCLUDED IN THIS LISTING
Category:

Description

STR / BUTTON VERSION controller is used for sequential lighting of the stairs steps.
The back light is switched on/off automatically, depending on the motion directions.
This is a plug and play version, no need programming skills.
All settings are available through touch button menu with a visual feedback
(without complex multi-level menus) in real time.
It allows installers and users of STR lighting systems to enjoy the simplicity of use.

HOW TO BUILD

SPECIFICATION:

Supply voltage:
12VDC
Maximum load :
25W / per channel
Led strip type :
3528,5050,2835 (no RGB)
Dimension:
115x155x75 mm (casing)
Casing material /protection :
ABC/ IP65

WIRING DIAGRAM:

 

SETUP

Connect the power supply.
( POWER led will light green, controller will make a sound, the first & last stairs will light up, by default the stairs quantity is 3 )

Touch MENU button.
(MENU led will light orange, controller will make a sound, stairs light will go off, now you are in setup menu.)

Touch SETUP button.
1st time – Now you can setup a steps quantity from 3 to 24. By default the qty. is 3
Touch UP or DOWN button to change settings. Watch the quantity of lighted steps.
When the quantity is ok, touch SETUP button second time . 

2nd time – Now you can adjust delay (the time before the stairs will go off). Touch UP or DOWN button to
change settings. By default , delay is 15sec. Watch the quantity of
lighted stairs.1=15sec , 2=30sec ,3=45sec , 4=60sec. Touch SETUP button third time .

3rd time – Now you can adjust a brightness. By default the brightness is set to max. Touch UP or DOWN
button to change settings. Watch a stair visual feedback. When brightness is ok, touch SETUP button
fourth time.

4th time – Now you can adjust brightness of first and last step when controller is in Night mode or to switch
this option off. By default the first and last step are on. Touch UP or DOWN button to
change settings. Touch SETUP button fifth time .

5th time – Now you can adjust light sensor sensitivity (Night/Day mode) By default the first and last stair starts
blinking. It means, that at present ambient light the controller is in Night mode. Touch UP or DOWN
button to change light sensor sensitivity. When the stairs stops blinking the controller goes to
Day mode. Touch SETUP button sixth time.

     6th time – Now you can adjust fade in speed. Touch UP or DOWN button to change the speed..
Watch the stairs visual feedback. Touch SETUP button seventh time.

     7th time – Now you can adjust fade out speed. Touch UP or DOWN button to change the speed..
Watch the stairs visual feedback. Touch SETUP button eighth time.

     8th time – Now you can switch between sequence modes. Touch UP or DOWN button to choose sequence type.
a. Fade in/out one by one. b. Fade in/out simultaneously. c. Switch all led ON .(constantly ON)

Touch MENU button to exit SETUP menu. 
( Menu led will light off, all your settings are stored .)

 

 

Delivery

Air Mail is used predominantly as a shipping method ,lead times between the placement of an order and delivery are generally 1-3 days.
In addition to Air Mail we offer DPD click for info – fast shipping service, the delivery price have to be estimated first before placing the order.
Please note , that DPD service is available only in Europe.